AMX MVP-8400i Setting the image cache, Clearing the image cache, Checking image cache status

Setup Pages

Setting the image cache

In the Protected Setup page:

1.Press the Cache button in the Protected Setup Navigation Buttons section. This opens the Image Cache page.

2.Set the cache expiration in the field Flash/RAM Cache Expires. The Up and Down arrows increment through the available time frames.

3.Press the Enable button to turn on image caching. The button appears illuminated when enabled.

Select the Up and Down arrows for the field Flash Cache Size to increase or reduce the amount of Flash memory used; the maximum amount of flash that can be allocated for caching is 75% of available flash.

Clearing the image cache

In the Protected Setup page:

1.Press the Cache button in the Protected Setup Navigation Buttons section. This opens the Image Cache page.

2.Press Clear Cache. This clears all image cache currently stored on the panel (both Flash and RAM).

Checking image cache status

In the Protected Setup page:

Press the Cache button in the Protected Setup Navigation Buttons section. This opens the Image Cache page. All status information is located in the Image Cache Status section of the page.

Password Setup Page

The options on the Password Setup page enable you to assign the passwords required for users to access the Protected Setup page, and to release the MVP from a MVP-TDS or MVP-WDS docking station (FIG. 69).

FIG. 69 Password Setup page

92 MVP-8400i Modero Viewpoint Wireless Touch Panels