AMX MVP-8400i manual Input Commands Cont, Programming, Note This

Programming

Input Commands (Cont.)

^MPS	Syntax:
Set mouse pass	"'^MPS-<0-6>,<0-6>,...'"
through. Allows	Variable:
mouse input to
	0 = Pass mouse input to G4 application.
multiple
	1-4 = Pass mouse input data to a VGA card with USP output for redirection to a
destinations
simultaneously.	computer.
Destinations are	5 = Pass mouse buttons to the NetLinx master in the form of a custom event.
comma delimited.	6 = Pass mouse buttons and movement to the NetLinx master in the form of custom
Note: This	events.
command causes	Example:
all mice
	SEND COMMAND Panel,"'^MPS-0'"
connected to the
G4 product and	Passes the mouse input to a connected G4 application.
any mice on a
computer
connected via a
VGA card with
USB output to
reset to position
0,0.
^TPS	Syntax:
TPI only.	"'^TPS-<0-1>'"
Set touch pass	Variable:
through.	1 = Creates a transparent connection between the touch input serial port and the
	program port. This is useful for connecting a PC to the program port and controlling
	touch input on that PC from the touch panel connected to the touch input port. This will
	cause the command terminal on the program port to shutdown.
	0 = Undoes the changes.
	Example:
	SEND COMMAND Panel,"'^TPS-1'"
	Enables the touch pass through.
^VKS	Key presses and key releases are not distinguished except in the case of CTRL, ALT, and
Send one or more	SHIFT.
virtual key strokes	Refer to theEmbedded Codes table on page 149 that define special characters which
to the G4	can be included with the string but may not be represented by the ASCII character set.
application.	Syntax:
	"'^VKS-<string>'"
	Variable:
	string = Only 1 string per command/only one stroke per command.
	Example:
	SEND COMMAND Panel,"'^VKS-'8"
	Sends out the keystroke 'backspace' to the G4 application.

148 MVP-8400i Modero Viewpoint Wireless Touch Panels