AMX MVP-8400i manual Button Commands Cont, Programming, entry is required

Programming

"^" Button Commands (Cont.)

^BDO	Determines what order each layer of the button is drawn.
Set the button	Syntax:
draw order.	"'^BDO-<vt addr range>,<button states range>,<1-5><1-5><1-5><1-
	5><1-5>'"
	Variable:
	variable text address range = 1 - 4000.
	button states range = 1 - 256 for multi-state buttons (0 = All states, for General buttons
	1 = Off state and 2 = On state).
	layer assignments = Fill Layer	= 1
	Image Layer = 2
	Icon Layer	= 3
	Text Layer	= 4
	Border Layer = 5
	Note: The layer assignments are from bottom to top. The default draw order is 12345.
	Example:
	SEND_COMMAND Panel,"'^BDO-530,1&2,51432'"
	Sets the button’s variable text 530 ON/OFF state draw order (from bottom to top) to
	Border, Fill, Text, Icon, and Image.
	Example 2:
	SEND_COMMAND Panel,"'^BDO-1,0,12345'"
	Sets all states of a button back to its default drawing order.
^BFB	ONLY works on General-type buttons.
Set the feedback	Syntax:
type of the button.	"'^BFB-<vt addr range>,<feedback type>'"
	Variable:
	variable text address range = 1 - 4000.
	feedback type = (None, Channel, Invert, On (Always on), Momentary, and Blink).
	Example:
	SEND_COMMAND Panel,"'^BFB-500,Momentary'"
	Sets the Feedback type of the button to 'Momentary'.
^BIM	Syntax:
Set the input	"'^BIM-<vt addr range>,<input mask>'"
mask for the	Variable:
specified address.
	variable text address range = 1 - 4000.
	input mask = Refer to theText Area Input Masking section on page 156 for character
	types.
	Example:

SEND_COMMAND Panel,"'^BIM-500,AAAAAAAAAA'"

Sets the input mask to ten ’A’ characters, that are required, to either a letter or digit

(entry is required).

MVP-8400i Modero Viewpoint Wireless Touch Panels 115