AMX MVP-8400i manual Page Commands Cont, Programming, Ppof, Ppog, Ppon

Programming

Page Commands (Cont.)

PPOF	If the page name is empty, the current page is used (see example 2). If the popup page is
Deactivate a	part of a group, the whole group is deactivated. This command works in the same way as
	the ’Hide Popup’ command in TPDesign4.
specific popup
page on either a	Syntax:
specified page or	"'PPOF-<popup page name>;<page name>'"
the current page.
	Variable:
	popup page name = 1 - 50 ASCII characters. Name of the popup page.
	page name = 1 - 50 ASCII characters. Name of the page the popup is displayed On.
	Example:
	SEND_COMMAND Panel,"'PPOF-Popup1;Main'"
	Deactivates the popup page ’Popup1’ on the Main page.
	Example 2:
	SEND_COMMAND Panel,"'PPOF-Popup1'"
	Deactivates the popup page ’Popup1’ on the current page.
PPOG	If the page name is empty, the current page is used (see example 2). Toggling refers to the
Toggle a	activating/deactivating (On/Off) of a popup page. This command works in the same way
	as the ’Toggle Popup’ command in TPDesign4.
specific popup
page on either a	Syntax:
specified page or	"'PPOG-<popup page name>;<page name>'"
the current page.
	Variable:
	popup page name = 1 - 50 ASCII characters. Name of the popup page.
	page name = 1 - 50 ASCII characters. Name of the page the popup is displayed On.
	Example:
	SEND_COMMAND Panel,"'PPOG-Popup1;Main'"
	Toggles the popup page ’Popup1’ on the Main page from one state to another (On/Off).
	Example 2:
	SEND_COMMAND Panel,"'PPOG-Popup1'"
	Toggles the popup page ’Popup1’ on the current page from one state to another (On/Off).
PPON	If the page name is empty, the current page is used (see example 2). If the popup page is
Activate a	already On, do not re-draw it. This command works in the same way as the ’Show Popup’
	command in TPDesign4.
specific popup
page to launch on	Syntax:
either a specified	"'PPON-<popup page name>;<page name>'"
page or the
	Variable:
current page.
	popup page name = 1 - 50 ASCII characters. Name of the popup page.
	page name = 1 - 50 ASCII characters. Name of the page the popup is displayed On.
	Example:
	SEND_COMMAND Panel,"'PPON-Popup1; Main'"
	Activates the popup page ’Popup1’ on the Main page.
	Example 2:
	SEND_COMMAND Panel,"'PPON-Popup1'"
	Activates the popup page ’Popup1’ on the current page.

106 MVP-8400i Modero Viewpoint Wireless Touch Panels