AMX MVP-8400i manual EAP-LEAP Settings, WPA-PSK Settings, Password/Pass Phrase

Setup Pages

WPA-PSK Settings

SSID (Service Set Identifier):	Opens an on-screen keyboard to enter the SSID name used on the target
	WAP.
	The SSID is a unique name used by the WAP, and is assigned to all panels
	on that network. An SSID is required by the WAP before the panel is permit-
	ted to join the network.
	• The SSID is case sensitive and must not exceed 32 characters.
	• Make sure this setting is the same for all points in your wireless network.
	• NXA-WAP200Gs use AMX as their default SSID.
	• If this field is left blank, the panel will attempt to connect to the first available
	WAP.
Password/Pass Phrase:	Opens an on-screen keyboard to enter a passphrase (password).
	• This alpha-numeric string must use a minimum of 8 characters and a
	maximum of 63.
	• The exact pass phrase string (including capitalization) must be entered on
	the target WAP.
Save/Cancel:	• Save - store the new security information, apply changes, and return to the
	previous page.
	• Cancel - discard changes and return to the previous page.

Refer to the Configuring a Wireless Network Access section on page 21 for details on these security options.

Refer to the Using the Site Survey tool section on page 22 for more information on using this tool.

EAP-LEAP Settings

Press the EAP-LEAPbutton to open the EAP-LEAP Settings page (FIG. 60).

FIG. 60 Wireless Settings page - EAP-LEAP Settings

EAP (Extensible Authentication Protocol) is an Enterprise authentication protocol that can be used in both wired and wireless network environments. EAP requires the use of an 802.1x Authentication Server, also known as a Radius server. The configuration fields described below take variable length strings as inputs. An on-screen keyboard is opened when these fields are selected.

76 MVP-8400i Modero Viewpoint Wireless Touch Panels