AMX MVP-8400i manual Batteries Page Cont, Setup Pages, Low Battery Warning, Battery Status

Setup Pages

Batteries Page (Cont.)

Low Battery Warning:	The UP/DN buttons adjust the time value (in minutes) available on the battery
	(for use) before the panel displays a low battery warning.
	Range - 10 - 45, default = 15 min.
	Note: This field applies to MVP-BP batteries installed in the panel.
Very Low Battery Warning:	The UP/DN buttons adjust the time value (in minutes) available on the battery
	before the panel displays a very low battery warning (indicating near-term panel
	shutdown).
	• Range = 3 - 15, default = 5 min.
	• This value cannot exceed the Low Battery Warning value.
	Note: This field applies to MVP-BP batteries installed in the panel.
Battery Status:	• The Combined Charge Status bargraph indicates the combined power
	charge available from batteries installed in the panel.
	• The Battery One Charge Status bargraph indicates the power charge
	available on the Slot 1 battery (in the panel).
	• The Battery Two Charge Status bargraph indicates the power charge
	available on the Slot 2 battery (in the panel).
	• The Battery Dock 1 Charge Status bargraph indicates the power charge
	available on the docking station’s battery #1.
	• The Battery Dock 2 Charge Status bargraph indicates the power charge
	available on the docking station’s battery #2.
	Note: If no batteries are being charged within the docking station’s battery com-
	partments, or the MVP is not connected to a docking station; both Battery Dock
	Charge Status fields are left blank.
	• The Docking Station Version field indicates the firmware version currently
	installed on the docking station.
	• The Battery Level Port field indicates the port being used to report charge
	status levels back to the NetLinx Master (set in TPDesign4).
	• The Battery Level field indicates the level being used to report status levels
	back to the NetLinx Master (set in TPDesign4).

62 MVP-8400i Modero Viewpoint Wireless Touch Panels