AMX MVP-8400i manual Setup Pages, Connection Status, Display Timeout

Setup Pages

Setup Pages

The Setup page (FIG. 44) allows quick access to several basic panel properties:

FIG. 44 MVP-8400 Setup page

Features on this page include:

Setup Page

Navigation Buttons: The buttons along on the left side of the page provide access to secondary Setup pages (see following sections).

Connection Status icon: The icon in the upper-right corner of each Setup page shows online/offline state of the panel to the master.

	• Bright red - disconnected
	• Bright green - connected. Blinks when a blink message is received to dark green
	every 5 seconds for half a second then go back to bright green.
	• Bright yellow - panel missed a blink message from the master. It will remain
	yellow for 3 missed blink messages and then turn red. It will return to green
	when a blink message is received.
	Note: a Lock appears on the icon if the panel is connected to a secured NetLinx
	Master.
Connection Status:	Displays whether the panel is communicating externally as well as the encryption
	status of the Master, the connection type (Ethernet or USB), and what System the
	panel is connected to.
	• Until a connection is established, the message displayed is: “Attempting via...”.
	• When a connection is established, the message displayed is either: “Connected
	via Ethernet “or “Connected via USB “.
	• The word “Encrypted” appears when an encrypted connection is established with
	a NetLinx Master.
	Note: The panel must be rebooted before incorporating any panel communication
	changes and to detect Ethernet connections.
Display Timeout:	Indicates the length of time that the panel can remain idle before activating Sleep
	mode (causing the LCD to power down).
	• Press the UP/DN buttons to increase/decrease the Display Timeout setting.
	Range = 0 - 240 (minutes).
	• Set the timeout value to zero to disable Sleep mode.
	Note: Small timeout values maximize the life of the battery charge.

52 MVP-8400i Modero Viewpoint Wireless Touch Panels