AMX MVP-8400i manual Wireless Settings Page Cont, IP Settings Cont, Access Point MAC, Address

	Setup Pages
Wireless Settings Page (Cont.)
IP Settings (Cont.):
Domain
	Enter a unique name to the panel for DNS look-up.
MAC Address
	This unique address identifies the wireless Ethernet card in the panel (read-
	only).
Active Roaming on	When enabled, the device is actively roaming on the channels 1, 6, and 11. By
Channels 1,6,11	default, Active Roaming is disabled.
	Of all the frequency channels that are assigned for wireless, only three are
	nonoverlapping frequencies that do not interfere with each other.
	Nonoverlapping channels avoid the interference that can affect the signal.
Access Point MAC	This unique address identifies the Wireless Access Point (WAP) used by this
Address:	panel for wireless communication (read-only).
	• Site Survey button: Launches the Site Survey page. The options on this page
	allow you to detect (“sniff-out”) all WAPs transmitting within range of the
	panel’s NXA-WC80211GCFWi-Fi card.
	Data displayed on the Site Survey page is categorized by:
	- Network Name (SSID) - WAP names
	- Channel (RF) - channels currently being used by the WAP
	- Security Type - security protocol enabled on the WAP, if detectable
	- Signal Strength - None, Poor, Fair, Good, Very Good, and Excellent
	- MAC Address - Unique identification of the transmitting Access Point
	• Refer to the Using the Site Survey tool section on page 22 for more detailed
	information on the SIte Survey page.
	• When communicating with a NXA- WAP200G, enter the MAC Address
	(BSSID) of the target WAP as the Access Point MAC Address. Refer to the
	WAP200G Instruction Manual for more information.
Wireless Security:	Sets the wireless security method to be used by the panel to connect to the net-
	work. Selecting any of the connection method buttons invokes the relevant con-
	figuration page, with options that allow you to define parameters specific to the
	selected method of connection.
	• Refer to the following Wireless Security Page section on page 71 for further
	details on these security options.
Open (Clear Text)	This button opens the Open (Clear Text) Settings page (FIG. 57 on page 72).
	“Open” security does not utilize any encryption methodology, but requires an
	SSID (alpha-numeric) entry. This entry must match the Network Name (SSID)
	entry of the target WAP so the panel knows what device it is using to communi-
	cate with the network.
	• Refer to the following Wireless Security Page section on page 71 for further
	details on these security options.
Static WEP	This button opens the Static WEP Settings page (FIG. 58 on page 73).
	“Static WEP” security requires that both a target WAP be identified and an
	encryption method be implemented prior to establishing communication.
	• Refer to the Wireless Security Page section on page 71 for further details on
	these security options.
WPA-PSK	This button opens the WPA-PSK Settings page (FIG. 59 on page 75).
	“WPA-PSK” security is designed for environments where is it desirable to use
	WPA or WPA2, but an 802.1x authentication server is not available.
	PSK connections are more secure than WEP and are simpler to configure since
	they implement dynamic keys but share a key between the WAP and the panel
	(client).
	• Refer to the Wireless Security Page section on page 71 for details.

MVP-8400i Modero Viewpoint Wireless Touch Panels 69