AMX MVP-8400i manual Calibration Page, Calibration page

Setup Pages

Calibration Page

This page (FIG. 55) allows you to calibrate the touch panel for accurate button selection.

FIG. 55 Calibration page

Press and hold the two lower button on both sides of the display for 6 seconds to access the Calibration page (see FIG. 76 on page 159).

Press the crosshairs to calibrate the panel and return to the previous page.

Always calibrate the panel before its initial use, and after downloading new firmware.

In cases where the touch panel calibration is off to a degree that makes it difficult or impossible to navigate to this page, you can access it via G4 WebControl, so you can re-calibrate the panel.

MVP-8400i Modero Viewpoint Wireless Touch Panels 67