Controlling the Shutter Angle
•Press the MODE button to go to the next submenu. To enter the ramp duration, use the SEL and SET buttons and the handwheel as described above.
| A previously set ramp duration may now exceed |
| the technically fastest possible adjustment, if the |
| ramp duration is simply kept from an old |
| program. The READY LED then flashes green |
| and the warning ‘SEC RANGE’ is shown in the |
| main menu. The ramp duration must be cor- |
| rected. The camera can still be started for test |
| purposes in spite of the flashing warning. |
| However, the exposure may be incorrect! |
Note: | The shortest possible ramp time is adjusted by |
| turning the handwheel to the left |
| maximum ramp time is 100 seconds. |
Note: | While the ramp duration is being set, the |
| display shows the automatically calculated |
| screen time in the first display line, which |
| corresponds to the selected projection speed |
| (see the next two bullet points). |
100