Controlling the Iris

5.5.1.2Programming an iris table for other lenses(‘TBL EDIT’)

If ‘IRIS TBL’ flashes on the display when the WRC-1 is switched on, the MODE button must be pressed once to enter the ‘TBL LOAD’ mode.

If a lens has already been selected and the T-stops have been assigned previously, the menu for selecting the lens can be entered in the WRC rotary switch position ‘IRIS’ and the COMPENSATION rotary switch set to ‘OFF’ by pressing the MODE button three times.

The values for the last lens used may still be stored and active in the WRC-1. All settings and the active iris table should therefore always be checked in order to avoid incorrect exposures!

To delete an old assignement (iris table), turn the handwheel until ‘DEL’ is shown in the second line of the display. Then press the SEL button. ‘TBL’ flashes in the first line. Press the SET button to finally delete the old assignement. ‘DONE’ is shown on the display for one second.

44