Controlling the Camera Speed

•Press the MODE button to go to the next submenu. To define the fixed values for the mirror shutter angle (if controlled by the WRC-1) and the aperture of the lens (if controlled by the WRC-1), use the SEL and SET buttons and the handwheel, as described above.

The display shows full T-stops followed by the tenth of a T-stop. Example: T-stop 2.8 plus half a T-stop is shown as 2.8_5. The tenths of a T-stop are linearly divided between the two full T-stop positions.

•Press the MODE button to go to the next submenu. To enter the ramp duration, use the SEL and SET buttons and the handwheel, as described above.

 

A previously set ramp duration may now exceed

 

the technically fastest possible adjustment, if the

 

ramp duration is simply kept from an old

 

program. The READY LED then flashes green

 

and the warning ‘SEC RANGE’ is shown in the

 

main menu. The ramp duration must be cor-

 

rected. The camera can still be started for test

 

purposes in spite of the flashing warning.

 

However, the exposure may be incorrect!

Note:

The shortest possible ramp time is adjusted by

 

turning the handwheel to the left end-stop. The

 

maximum ramp time is 100 seconds.

130