•Press the SEL button for longer than 2 seconds.

The first digits in the first display line flash. The required value can now be set using the handwheel. Press the SEL button again to switch to the next digit. The first digits are confirmed, and the decimal positions are set to ‘0’ by pressing the SET button. The values in the second display line can be set accordingly.

•Press the MODE button to go to the next submenu. To define the fixed values for the mirror shutter angle (if controlled by the WRC-1) and the aperture of the lens (if controlled by the WRC-1), use the SEL and SET buttons and the handwheel, as described above.

If the aperture of the lens is controlled by the WRC-1, the display shows full T-stops followed by the tenth of a T-stop. Example: T-stop 2.8 plus half a T-stop is shown as 2.8_5. The tenths of a T-stop are linearly divided between the two full T-stop positions.

•Press the MODE button to go back to the main menu.

fps

comp. off

fps

fps

Controlling the Camera Speed

105