7.3 Operation

With the WRC-1 the

-cameral speed,

-the mirror shutter angle and

-the iris of the lens

can be adjusted using the handwheel.

Programs (ramps) can be created to automatically adjust the controlled operating functions for a pre-defined period of time. Changes in exposure can be compensated for by automatically adjusting one or two of the other controllable parameters.

The WRC-1 does not have its own ON/OFF switch. It is activated via the devices to which it is connected (e.g. the WMU-1).

•The WRC rotary switch is used to select the master value which is to be adjusted (camera speed, shutter angle, iris), and determines whether the adjustment is to be made

manually using the handwheel (iris, ) , fps),

or whether it is to be time-controlled (ramp Iris, ramp ) , ramp fps) and started by pressing the RAMP button in the camera run.

•The camera can be started by pressing the RUN button on the WMU-1.

•The COMPENSATION rotary switch is for defining whether, and how, the difference in exposure resulting from adjusting the master value is to be compensated for. The COMPENSATION rotary switch governs the slave values.

Please read the operating instructions in chapter 5.3 and chapter 5.5.1.5!

Quick Guide

173