Guide

7.2 Basic operating modes

Quick

IRIS sliding switch

WRC/CAM sliding switch

ON

 

OFF

READY WRC CAM

IRIS

RUN

7.2.1 CAM mode

Set the WRC/CAM sliding switch to CAM. In this operating mode the display on the WRC-1 is identical to the camera display. The settings on the camera can be adjusted by pressing the MODE, SEL and SET buttons. The OPEN button serves as the PHASE button on the camera.

SEL button MODE button

OPEN/PHASE button

WRC rotary switch

OPEN

PHASE

WRC

Iris

MODE

ramp Iris ramp

ramp fps

fps

PROG

SEL/

SET/

RAMP

 

Iris

off

Iris

50%

compen

 

max Iris

sation

 

 

 

max

user

 

 

SET button

RAMP button

COMPENSATION rotary switch

7.2.2 WRC mode

Set the WRC/CAM sliding switch to WRC. This mode provides access to advanced remote control options, which allow different ramps to be programmed with the corresponding exposure compensation options.

IRIS ON/OFF

handwheelWRC-1

fps, ,Iris

The IRIS sliding switch is used when switching on the WRC-1 to determine whether the WRC-1 should control the iris motor (IRIS ‘ON’) or not.

As the T-stops on the ARRIMACROS change when the lens is focussed, the ARRIMACROS may not be used with the LCS or the WRC-1 system.

172