Controlling the Shutter Angle

•Press the MODE button to go to the next submenu. To define the fixed values for the aperture of the lens (if controlled by the WRC-1) and the camera speed, use the SEL and SET buttons and the handwheel, as described above.

The display shows full T-stops followed by the tenth of a T-stop. Example: T-stop 2.8 plus half a T-stop is shown as 2.8_5. The tenths of a T-stop are linearly divided between the two full T-stop positions.

•Press the MODE button to go to the next submenu. To enter the ramp duration, use the SEL and SET buttons and the handwheel, as described above.

A previously set ramp duration may now exceed the technically fastest possible adjustment, if the ramp duration is simply kept from an old program. The READY LED then flashes green and the warning ‘SEC RANGE’ is shown in the main menu. The ramp duration must be cor- rected. The camera can still be started for test purposes in spite of the flashing warning. However, the exposure may be incorrect!

90