5.7.4 Speed / compensation iris and shutter angle 50%

The camera speed can be manually adjusted within the

Note

The following warnings may be displayed:

pre-defined end-stops of the handwheel

 

‘IRIS TBL’ – a valid iris table has not yet been

(master value: Camera speed).

 

activated;

The exposure is automatically compensated for with the

 

readings with ‘NO’ in the first display line

iris and the shutter angle at equal proportions.

 

indicate that the selected function is currently

 

 

not available (example: ‘NO IRIS’ although the

If the iris control is not available, the flashing warning

 

iris control is activated on the WRC-1, the iris

‘NO IRIS’ is displayed in the main menu. Connect the iris

 

motor has not yet been connected);

control as described in chapter 4.1.2, calibrate the lens

 

readings with ‘RANGE’ in the second display

and assign the T-stops as described in chapter 5.5.1!

 

line indicate that the adjustment range of a

 

 

parameter has been exceeded (example: the

The first line of the main menu shows the mirror shutter angle,

 

selected speed is not available with this camera);

which is automatically adjusted within the pre-defined

 

readings with ‘OFF’ in the first display line

limit values. The symbol ‘F’ at the end of the first line

 

indicate that this function is deactivated on the

indicates the additional control of the iris. The second line

 

camera (example: shutter angle of the 435 is

shows the currently adjusted camera speed using the

 

set manually = ‘OFF ANGLE’).

handwheel.

 

Correct parameters must be set before the

By pressing the SET button, the automatically adjusted

 

camera is started!

 

 

T-stop can be shown in the first display line. The display

 

 

shows full T-stops followed by the tenth of a T-stop.

 

 

Example: T-stop 2.8 plus half a T-stop is shown as 2.8_5.

 

 

The tenths of a T-stop are linearly divided between the

 

 

two full T-stop positions.

 

 

Controlling the Camera Speed

113