The maximum aperture (smallest T-stop number) corresponds to the selected minimum shutter angle.

•Press the MODE button to go to the next submenu. To enter the fixed value for the camera speed, use the SEL and SET buttons and the handwheel.

•Press the MODE button to go to the next submenu. To enter the ramp duration, use the SEL and SET buttons and the handwheel as described above.

A previously set ramp duration may now exceed the technically fastest possible adjustment, if the ramp duration is simply kept from an old program. The READY LED then flashes green and the warning ‘SEC RANGE’ is shown in the main menu. The ramp duration must be cor- rected. The camera can still be started for test purposes in spite of the flashing warning. However, the exposure may be incorrect!

Note:

The shortest possible ramp time is adjusted by

 

turning the handwheel to the left end-stop. The

 

maximum ramp time is 100 seconds.

•Press the MODE button to go back to the main menu.

Controlling the Shutter Angle

95