4. Setup

4.1 WRC-1 in wireless mode

Setup

In order to be able to use the WRC-1 in wireless mode, it must be mounted on a Wireless Main Unit (WMU-1). The Wireless Main Unit supplies the WRC-1 with power and establishes the radio link with the camera.

An Universal Motor Controller (UMC-1) with an Universal Radio Module (URM-1) must be mounted on the camera. The UMC-1 and the URM-1 establish the radio link outgoing from the camera. A Lens Control Motor CLM-2 for controlling the iris can be connected to the Universal Motor Controller UMC-1.

For details about setting up the LCS components, refer also to the LCS instruction manual.

Note: In order to operate the WRC-1 the following EPROM versions must be used:

WMU-1:

01.50 or higher

UMC-1:

01.50 or higher

ARRIFLEX 435

2.4 or higher

Please contact your nearest ARRI dealer or one of the service stations to update the EPROMs or to acquire the latest software version.

Required system components:

WRC-1

....................................................

K2.52087.0

WMU-1

...................................................

K2.52052.0

with WBU-2 battery ..................................

K2.52088.0

WAC-1 charger ........................................

K2.52072.0

UMC-1

....................................................

K2.52040.0

with UC-C1 cable [K2.52046.0 as replacement]

dovetail adapter .......................................

K2.52080.0

URM-1 .....................................................

K2.52048.0

UC-R1 cable .............................................

K2.52079.0

for iris control additionally

 

CLM-2 .....................................................

K2.52036.0

possibly with console .................................

K2.52035.0

Note:

CLM-1 motors cannot be used

 

 

as iris motors for the WRC-1!

 

17