Controlling the Camera Speed

ramp fps

comp.<)

PROG

fps

PROG

fps

PROG

PROG

PROG

PROG

5.7.10Ramp speed / compensation shutter angle

The camera speed is continuously adjusted within the predefined limit values over a pre-defined period of time after pressing the RAMP button in the camera run

(master value: Camera speed).

The mirror shutter angle is automatically adjusted by the WRC-1 within the pre-defined limit values, to compensate the exposure.

The first line of the main menu shows the automatically calculated value of the shutter angle. The current camera speed is shown in the second line.

The ‘PROG’ symbol indicates that a time-controlled ramp function has been selected.

By pressing the SET button, the currently set T-stop (if controlled by the WRC-1) can be shown in the first display line. The display shows full T-stops followed by the tenth of a T-stop. Example: T-stop 2.8 plus half a T-stop is shown as 2.8_5. The tenths of a T-stop are linearly divided between the two full T-stop positions.

136