In WRC mode the WRC-1 overwrites the camera-internal settings for the camera speed and the mirror shutter angle.
This can result in the following takes being incorrectly exposed if the set values are not checked. In practice this means, for instance, that the angle of the mirror shutter set by the WRC-1 is retained; this also applies when switching back from PS/CCU to NORM.
The shutter angle is not automatically reset to 180° !
•All programs set using the WRC-1 are only stored in the WRC-1 itself, and not in the camera. The RAMP function of the WRC-1 therefore is not identical with the camera’s own program function. It is therfore also independent of a program which has been stored in the camera using the CCU or the LCC. These camera programs cannot be altered using the WRC-1. They can only be activated and started in CAM mode like using the operating buttons close to the camera display.
•The ZMU must always be switched on first if cable and wireless units are used together.
•The WRC-1 and ICU-1 may not be operated simulta- neously.
The WRC-1 continuously sends values to the camera when adjustments are carried out using the handwheel or during ramp functions. The radio connection must therefore function perfectly, otherwise the correct exposure is not ensured. The user must check that the RF LED is always on green while the ramp function is running!
•If a warning is displayed that the compensation limit values cannot be adhered to (readings ‘ANGLE RANGE’, ‘IRIS RANGE’, ‘SPEED RANGE’), while switching over the WRC or the COMPENSATION rotary switches, the end-stops or limit values are still programmed as described. The exceeded values can then be corrected in the relevant submenus.
•All warnings, such as when end-stops or limit values are exceeded, are only shown in the main menu. The submenus, on the other hand, are only used to define all relevant values.
