Controlling the Shutter Angle
parameter has been exceeded (example: the selected speed is not available with this camera); readings with ‘OFF’ in the first display line indicate that this function is deactivated on the camera (example: shutter angle of the 435 is set manually = ‘OFF ANGLE’).
Correct parameters must be set before the camera is started!
The handwheel is without function in the main menu. Press the RAMP button when the camera is running to start the ramp. The camera can be started, by pressing the RUN button on the
The ramp can be reversed, by pressing the RAMP button again: the ramp then reverses its direction until it reaches the start value again. For best results wait until the end of the ramp.
With most lenses, the
With the iris wide open a
98