
the menus
ON |
| OFF |
READY WRC CAM | IRIS | RUN |
PROG
SEL button
OPEN | MODE | SEL/ | SET/ | RAMP |
PHASE |
|
|
|
|
SET button
• Press the MODE button to change from the main menu |
to a submenu. Each further press of the MODE button |
takes the user to the next submenu, until the main |
menu mode reappears. |
• In a submenu press the SEL button for longer than 2 |
seconds to activate the edit mode, in which values can |
be defined. |
• The flashing digits can be edited using the handwheel. |
WRC
Iris
ramp Iris ramp
ramp fps
fps
Iris | off |
Iris 50% | compen |
max Iris | sation |
| |
max | user |
|
• By pressing the SEL button the adjusted value is stored |
and the next digits are activated. After the last digit |
has been entered the edit mode is exited. |
If only plain figures are to be adjusted, the decimal positions can easily be set to ‘0’ by pressing the SET button. The values for the next line can then be entered.
fps, ,Iris
handwheel
The submenus cannot be edited while the camera is running.
34