4.2 WRC-1 in cable mode
Connected with a cable to the camera only those fuctions of the WRC-1 are available which relate to the camera speed and the shutter angle. The iris of the lens cannot be controlled in the cable mode because the iris motor cannot be accessed.
Required system components:
WRC-1 .................................................... | K2.52087.0 |
WC-W1-S cable ....................................... | K2.52089.0 |
WHA-1 .................................................... | K2.52070.0 |
| |
| WRC-1 |
RELEASE button | |
black pin
WHA-1
WC-W1
4.2.1Mounting the WRC-1 on the Wireless Handgrip Attachment (WHA-1)
•If a control unit is already attached remove it by pressing the release button. Swing out the unit and then remove it by pulling it upwards.
•Insert the WRC-1 into the available free space on the WHA-1 (Wireless Handgrip Attachment) with the wide black pin pointing forward ➪ photo. Then press the WRC-1 onto the WHA-1 until the module audibly snaps into position.
•Connect the WHA-1 to the CCU socket of the camera using the WC-W1-S cable.