ARRI WRC-1 Using the menus

Using the menus

ON		OFF
READY WRC CAM	IRIS	RUN

MODE button					SET button
OPEN	MODE	SEL/	SET/		RAMP
PHASE
	ramp Iris			Iris	off
	ramp				compen
WRC	ramp fps		Iris 50%
				sation
	fps		max Iris
Iris			max		user

WRC-1

fps, ,Iris

Note:	If exposure compensation is not possible with
	the set options – e.g. adjusting the iris cannot
	be compensated at the same time by the iris –
	the WRC-1 displays the message ‘NO FUNC’
	(no function) in the main menu.

In the main menu limit values, end-stops for the handwheel (definition: see Glossary or 5.4.2.1 Limit values), or fixed values (definition: see Glossary or 5.4.2.2 Fixed values below) for the exposure cannot be pre-set. The main menu valid for each operating mode is explained later on with the respective mode.

•By pressing the SET button values that are currently not displayed can be checked, e.g. the current shutter angle and the camera speed can be checked in the iris main menu.

•Press the MODE button to change from the main menu to the submenus. Press the MODE button again to enter the next submenu until the main menu mode reappears.

The submenu sequence can vary according to the operating modes selected using the WRC- and COMPENSATION rotary switches.

32