The WRC-1 is not able to check whether the selected user-defined iris table is actually compatible with the lens being used. An error message can only be displayed if the iris motor
reaches the end-stops of the lens during cali- CAL button bration, and these had been positioned else-
where while the lens was being programmed.
•If the wrong iris table has been unintentionally selected (e.g. by choosing the wrong memory area), and the iris motor strikes unexpected end-stops during the calibration process, the warning ‘LENS ERROR’ is displayed. Press the SEL or SET button to go to the mode for assigning the T-stops. The current T-stops can be reassigned.
ft | | | | | | |
m | | | | | | filter |
h:min | | | | | |
1 | 2 | 3 | 4 | | jam |
TC UB 5 | 6 | 7 | 8 | PROG | asy |
fpsR | | | | | | end |
sec:f | | | | | | bat |
