camera can still be started for test purposes in

• Press the MODE button to go back to the main menu.

spite of the flashing warning. However, the

 

exposure may be incorrect!

 

•Press the MODE button to go to the next submenu. The limit values for the iris can be defined using the SEL and SET buttons and the handwheel.

One of the two limit values (minimum or maximum aperture, depending on the adjustment direction of the camera speed) can be defined; the other limit value is automatically calculated by the WRC-1.

Press the SEL button for longer than 2 seconds. Depending on the definable limit value, the T-stop display flashes in the first or second display line. This can now be set using the handwheel.

The automatically calculated other limit value is shown in the other display line. Press the SEL button again to switch to the next digit. The selected T-stop is confirmed and the decimal is set to ‘0’ by pressing the SET button. The full aperture (smallest T-stop number) corresponds to the selected maximum camera speed.

Controlling the Camera Speed

123