Setup
RELEASE button radio channel ON button
CAL button
RUN button
4.1.1Mounting the WRC-1 on the Wireless Main Unit (WMU-1)
•Switch off the Wireless Main Unit
•If an operating unit is already attached, remove it by pressing the RELEASE button ➪ photo.
Swing out the unit and then remove it by pulling it upwards.
•With the wide black pin ➪ photo pointing forward, insert the
Note: | The |
| together with other modules. |
Note: | Do not separate the hand control units from one |
| another when they are switched on, as this can |
| result in randomly set lens limits. |
18