•Press the MODE button to go to the next submenu. To define the values for the minimum and maximum shutter angle (if controlled by the WRC-1), use the SEL and SET buttons and the handwheel, as described above. The start value of the shutter angle is shown in the first display line, and the end value is shown in the second line.

•Press the MODE button to go to the next submenu. To define the values for the aperture of the lens (if controlled by the WRC-1), use the SEL and SET buttons and the handwheel, as described above.

The start value of the aperture is shown in the first display line, and the end value is shown in the second line.

•If the defined values result in a constant exposure, the display shows ‘CONST LIGHT’ when the MODE button is pressed. If this reading is not shown, the exposure is altered during the ramp.

Controlling the Camera Speed

161