ARRI WRC-1 5.5.1.3Storing an iris table (‘TBL STORE’)

5.5.1.3Storing an iris table (‘TBL STORE’)

After assigning the T-stops the resulting iris table can be stored for later use.

•Press the MODE button in the submenu for assigning the T-stops to go back to the table menu (TBL LOAD,

TBL DEL, TBL EDIT, TBL STORE).

•Turn the handwheel until ‘STORE’ is shown in the second line.

•Press the SEL button. ‘STORE’ is displayed in the first line, and the number of the memory area is shown in the second line.

•Select the number of the required memory area using the handwheel. 10 memory areas are available.

When storing, existing table data in this memory area are overwritten without warning!

•The iris table is stored by pressing the SEL button. ‘DONE’ is displayed for one second.

•Note down the number of the memory area together with the programmed lens to simplify activating lenses at a later time.

Controlling the Iris

47