7.3.1 Iris control
•Before using the iris control functions, the T-stops engraved on the lens being used must be assigned in the WRC-1 and the lens’ end-stops must be calibrated. If a lens has not yet been selected and assigned to the T-stop values in the WRC-1 (condition on delivery from the factory, or the active iris table has been deleted from the memory), a flashing warning ‘IRIS TBL’ appears when the WRC-1 is switched on with the IRIS sliding switch set to the position ‘IRIS ON’.
Press the MODE button to switch to the input mode. If a lens has already been selected and programmed, the menu for selecting lenses or assigning T-stops can be accessed in the WRC rotary switch position ‘IRIS’. The so called table menu is the last submenu before returning to the main menu.
•Press the MODE button three times in the main menu in the WRC rotary switch position ‘IRIS’ with the COMPENSATION rotary switch at ‘OFF’ until ‘TBL LOAD’ is shown on the display.
