Warnings

Warnings when programming iris tables

A T-stop has been programmed which cannot be correct, e.g. T-stop 2.0 cannot lie between 2.8 and 4. The incorrectly positioned value must be deleted and reset.

ft

 

 

 

 

 

 

 

 

m

 

 

 

 

 

filter

h:min

 

 

 

 

 

1

2

3

4

 

jam

TC UB 5

6

7

8

PROG

asy

fps

R

 

 

 

 

 

 

end

sec:f

 

 

 

 

 

 

bat

The adjustment range of the iris ring is not compatible with the selected lens even though it has been re-calibrated. The selected lens is not compatible with the adjustment range of the choosen lens.

Use the correct lens,

or select the right lens when programming.

If the device is checked and found to be set properly, either the end-stops of the lens have probably been reset or another iris ring has been mounted. In this case, the lens can be programmed in the user mode (see chapter 5.5.1.2 Programming iris tables for other lenses).

168