Note: | Depending on the selected function and com- |
| pensation, this input menu can also be found in |
| other relevant positions by repeatedly pressing |
| the MODE button. |
In the table submenu, it is possible to:
•load factory- and
•delete iris tables from the active memory (factory- or
are not deleted), menu option ‘TBL DEL’,
•edit iris tables,
menu option ‘TBL EDIT’, or
•store
menu option ‘TBL STORE’.
•The required function is selected using the handwheel and then activated by pressing the SEL button.
For the Zeiss Ultra Primes, the Variable Primes, the High- speed set, and the Standard set iris tables are already programmed in the
10 memory areas are available.
The values of the last lens used may still be active and stored in the
All settings and the active iris table should therefore always be checked in order to avoid incorrect exposures!
Controlling the Iris
39