Connect the CCU socket on the camera with the CCU socket on the UMC-1 using the UC-R1 cable.

Select the same radio channel on the UMC-1 as is set on the WMU-1 photo (see LCS Instruction Manual, chapter 5.1.2.1). If several lenses are to be remotely controlled independently of each other, the radio channels 0 and 5, 1 and 6, and 3 and 7 can not be used simultaneously.

Due to local telecommunications regulations for the 2.4 GHz band only certain channels are available sometimes. Only allowed radio channels must be used.

Switch setting

Countries

0

USA, Canada, Mexico, New Zealand, Europe

 

except France and Spain

1

USA, Canada, Mexico, New Zealand, Europe

 

except France and Spain

2

Europe except Spain

3

USA, Canada, Mexico, New Zealand, France

4

Japan

5

Australia

6

Australia

7

Spain

8,9

see switch setting 0

 

 

• Switch on the UMC-1 using the ON/OFF switch photo.

ON/OFF switch

radio channel

IRIS socket

radio channel

ON/OFF switch

Setup

21