If the compensation range available with the shutter angle is exceeded, the READY LED flashes green and the warning ‘ANGLE RANGE’ flashes on the display after returning to the main menu. The limit values for the iris, the shutter angle or the camera speed must be corrected! The camera can still be started for test purposes in spite of the flashing warning. However, the exposure may be incorrect!
•Press the MODE button to go to the next submenu. The limit values for the mirror shutter angle can be defined using the SEL and SET buttons and the handwheel. One of the two limit values (minimum or maximum shutter angle, depending on the adjustment direction of the camera speed) can be defined; the other limit value is automatically calculated by the
Press the SEL button for longer than 2 seconds. Depending on the definable limit value, the shutter angle value flashes in the first or second display line. This can now be set using the handwheel.
The automatically calculated other limit value is shown in the other display line.
Press the SEL button again to switch to the next digit. The selected shutter angle is confirmed and the decimal is set to ‘0’ by pressing the SET button.
The minimum shutter angle corresponds to the selected minimum camera speed.
Controlling the Camera Speed
149