Avaya 38HBK00001SCM manual Connecting the INDeX CCM Server, System Software

Introduction System Specification

System Software

•Windows NT Server: Version 4.0, Media: CD ROM

•Windows NT Workstation: Version: 4.0, Media: CD ROM

•Windows 95: Version: Latest, Media: CD ROM

•Windows 98: Version: Latest, Media: CD ROM

•Windows 2000: Version: Latest, Media: CD ROM

•INDeX Application CD: Latest Version, Media: CD ROM, incorporating all related INDeX CCM applications

•INDeX Application Service Pack CD: Latest Version, Media: CD ROM, incorporating:

–Windows NT Server folder (containing Service Packs, ODBC Drivers and SQL 7 Service Pack)

–Windows NT Workstation folder (containing Service Packs ,ODBC Drivers)

•INDeX Report Manager Database CD: Latest Version, Media: CD, incorporating:

–Microsoft SQL Server 7.0

Connecting the INDeX CCM Server

The instructions below assume that you are using cables plus line drivers supplied by Avaya. You may also require additional serial cable for long cable distances.

1.Connect one end of the CABCON-9-25 cable to a free port on the INDeX control cabinet (the cabinet containing the CPU Cassette).

–You can use any of the 4 serial sockets on the cabinet. Avoid using the first (front) socket if possible, as this is required for some INDeX Telephone System maintenance tasks.

2.The diagram below shows the remaining connections.

–Note the DTE and DCE settings of the line drivers.

–You must connect CABWOC to serial port COM2 of the PC. If this is not a 9-pin port, you need a 9-pin male to 25-pin female serial converter.

–If the cable distances are short, you may connect CABWOC directly to CABCON-9-25.

Note

The Comms Port default settings on the Access Manager is Port 2. If you use a different

Comms Port, you must also change the Access Manager Comms Port Settings.

INDeX Contact Centre Modules	Page 6
Installation & Maintenance	38HBK00001SCM - Issue 11 (05/01)