Avaya 38HBK00001SCM manual Wall Mounting, INDeX Wallboard, Introduction, Installation, Housing

Wallboard Installation and Maintenance INDeX Wallboard 10

INDeX Wallboard 10

Introduction

The INDeX Wallboard 10 is a single line display consisting of 10 tri-colour characters. It connects via a multi-drop circuit to the host PC running the INDeX Wallboard Server application.

The display wallboard consists of the following assemblies.

Housing

A housing which is manufactured from an aluminum extrusion with anti reflective polycarbonate screen and removable aluminum end caps.

Power Supply

This display has an in-built DC power. This power supply has been set to the required AC voltage for the country of use.

Logic Control Board

Logic control board that receives RS485 serial data from the data RJ45 connector.

Installation

The display is supplied with 2 wall mounting brackets, ceiling mounting kit, PC connection plugs and wall fixings.

The INDeX Wallboard 10 displays all come with a 2-metre power cable provided for mains supply. Ensure the voltage requirement is compatible with the intended mains supply, and that the supply rating is greater than 5 Amp.

There are two methods of hanging the displays.

Wall Mounting

Fix the 2 wall mounting brackets using the cavity fixings provided. The bracket is angled to allow a 10 degree downward tilt to the display. Please ensure the brackets are the correct way up. See Figure 6.

Fig. 6

INDeX Contact Centre Modules	Page 102
Installation & Maintenance	38HBK00001SCM - Issue 11 (05/01)