Avaya 38HBK00001SCM manual Additional Equipment, Connection Details, Socket View, Pin Mini-DIN

Wallboard Installation and Maintenance INDeX Wallboard 22

Additional Equipment

External Alarm Device for connection to INDeX Wallboard 22 only.

An external alarm device is available to supplement the in-built buzzer. This interface allows a DC powered device to be attached to a couple of pins provided by a 6-pin DIN connector, which is mounted on the rear of the display. This 6-pin DIN port provides the ability to connect the additional device in addition to the internal buzzer.

Connection Details

The external 6-pin DIN connector is located adjacent to the Mains Power Lead (IEC Connector). The pins are numbered on the connector from 1-6. Port 1 will replicate the internal buzzer, and should be used for buzzers. Ports 2 and 3 are not used at this point.

Socket View

Fig. 4

6 Pin Mini-DIN

The overall connection schematic looks like this:

Fig. 5

Compatible external devices

All of the devices below are available from the Farnell Electronics Catalogue, and have been tested by Ferrograph and are recommended as suitable for connection to the external interface.

Note

This external interface has been designed for connection of DC Voltage devices ONLY.

Continuous/Pulsed Single Tone Sounders – 12V & 24V DC

Farnell Reference:	FEC143-400
	FEC143-402
	FEC143-403
INDeX Contact Centre Modules	Page 98
Installation & Maintenance	38HBK00001SCM - Issue 11 (05/01)