Avaya 38HBK00001SCM manual Install ADR OnStream Tape Drive

PC Configuration Server PC – SPC20 (Max 20 Clients)

Install ADR OnStream Tape Drive

1.Ensure the Tape Drive unit is installed in the PC according to the Manufacture’s instructions (Installing the Hardware section).

2.Once the PC is rebooted and you have logged on, insert the ADR Installation CD in to the CD ROM Drive. Close the OnStream CD Setup Window.

3.From the Windows taskbar, click Start, point to Settings and select Control Panel.

4.From the Control Panel, double click Tape Devices, the following screen appears:

5.Click Detect. Once the tape drive has been detected, click the Drivers tab, from which screen click Add.

6.From the Install Driver screen, click Have Disk, click Browse, and then select the Path “X:\NT Driver”, where X is the drive letter associated with the CD ROM Drive.

7.Click OK. With the Tape Drive selected, click OK. Once the tape driver is installed click OK.

8.Tape Devices screen will now display the details for the newly installed driver. Click OK to close the screen. Click Yes to restart the PC. The Tape drive is now ready for use.

INDeX Contact Centre Modules	Page 27
Installation & Maintenance	38HBK00001SCM - Issue 11 (05/01)