Avaya 38HBK00001SCM Enabling RAS at Startup, Disabling RAS at Startup, Click No, do not dial

Remote Connection Access Configuring RAS On Server PC

Enabling RAS at Startup

1.From the Windows taskbar, click Start, point to Settings and select Control Panel.

2.From the Control Panel options open Services, select Remote Access Server, and click Startup.

3.Click to select Automatic as the Startup Type and then click OK.

4.From the Services screen click Close.

6.Restart the PC.

7.Once the PC is running, the following screen may appear:

8.Click Settings. Click to clear "Disable auto-dial for this logon session".

9.Click No, do not dial.

Disabling RAS at Startup

1.From the Windows taskbar, click Start, point to Settings and select Control Panel.

2.From the Control Panel options open, Services, select Remote Access Server, click Startup,

3.Click to select Disabled and then click OK.

4.From the Services screen click Close.

5.Restart the PC.

Note

If it is necessary to have the RAS Service always available, click to select Automatic to run automatically in the services screen.

INDeX Contact Centre Modules	Page 116
Installation & Maintenance	38HBK00001SCM - Issue 11 (05/01)