Document No. 10-300077, Issue 2 20-15
Managing Intelligent Multicasting
CLI Command To delete a multicast sess ion client port using the CLI, enter th e following
command from Configure mode:
(configure)# clear intelligent-multicast client- port <session-id>
port <mod-port-spec>
Creating a Static Multicast Session
You can create a static multicast session using eith er the Web Agent or the
CLI.

Web Agent

Procedure To create a new static multicast session using the Web Agent:
1. In the navigation pane, expand the L2 Switching > Intelligent
Multicast folders, and then click Static Sessions.
The Static Multicast Sessions Web page is displayed in the content
pane. See Figure 20-7.
*Note: You must enable intelligent multicasting on a glo bal basis
to make your static multicast session active. See
“Configuring Global Intelligent Multicasting” earlier in
this chapter.
Table 20-5. Multicast Session Client Port Web Page Parameters
Parameter Definition
Select Select the multicast session client port.
Port Displays the client port number.
Application Displays the application(s) associated with this client port. The
applications are:
• Mgmt
• IGMP
• LGMP
• CGMP