Programming Paging Number
When Paging is selected, your FAX/MFC dials the pager number you’ve programmed, and dials your Personal Identification Number (PIN) when connected, to activate your pager and let you know you have a fax message in the memory.
1For the FAX, press Function, 8, 1. For the MFC, press Function, 1, 8, 1.
2Press 
or 
until the screen displays PAGING? and press Set.
PAG#:
ENTER & SET
3Enter your paghone number (up to 20 digits) followed by # # and press Set. Do not include the area code if it is the same as that of your FAX/MFC.
For example, 1 8 0 0 5 5 5 1 2 3 4 # #.
4If your pager requires a PIN, enter the PIN, press #, press Redial/Pause, enter your fax number, then press # # and press Set.
For example, 1 2 3 4 5 # Redial/Pause 1 8 0 0 5 2 1 2 8 4 6 # #.
— OR—
If you do not need a PIN, press Redial/Pause, enter the fax number, then press
# # and press Set. For example, Redial/Pause 1 8 0 0 5 2 1 2 8 4 6 # #.
5Press Stop to exit.
You cannot change a Paging number or PIN remotely.
Note Press Redial/Pause for each 3.5 second delay, as needed.
Setting Fax Storage
If you set Fax Storage to ON, you will be able to retrieve fax messages from another location, using Fax Forwarding, Paging, or Remote Retrieval functions. The screen will indicate when you have a fax stored in memory.
(See Remote Retrieval, page
1 For the FAX, press Function, 8, 2. | FAX STORAGE:OFF? | ||
For the MFC, press Function, 1, 8, 2. | |||
SELECT | & SET | ||
| |||
2Press 
or 
to select ON (or OFF) and press Set.
3Press Stop to exit.
If there are faxes in memory when you turn | ERASE ALL FAX? | |
Fax Storage OFF, the screens prompts you to | ||
1.YES 2.NO | ||
erase any faxes in memory. | ||
|
If you press 1, all fax data is erased and Fax Storage is turned off. If you press 2, data is not erased, and Fax Storage remains on.
(See Printing a Fax in Memory, page
8 - 2 R E M O T E F A X O P T I O N S
