![](/images/new-backgrounds/1184936/18493689x1.webp)
Setting Beeper Volume
You can set the beeper to LOW, HIGH or OFF. The default setting is LOW. When the beeper is set to LOW or HIGH, the FAX/MFC beeps every time you press a key or make an error, and at the end of fax sending or receiving.
1For the FAX, press Function, 1, 3. For the MFC, press Function, 1, 1, 3.
2Press or
to select your setting and press Set.
3Press Stop to exit.
Setting the Handset Volume
Before you begin to use the FAX/MFC, you must decide if you need to set the handset volume to AMPLIFY:ON for a user who is
VOLUME AMPLIFY: OFF
This default setting is appropriate if none of the users are or
on the control panel to adjust the volume. When the handset is replaced, the handset volume remains until you change it again.
VOLUME AMPLIFY: ON–TEMPORARY
This setting is appropriate if some of the users are or
on the control panel to adjust the volume to LOW, HIGH or AMPLIFY. When the handset is replaced, the handset volume will return to the default setting of LOW.
VOLUME AMPLIFY:ON–PERMANENT
Choose VOL or
on the control panel to adjust the volume to LOW, HIGH or AMPLIFY. When the handset is replaced, the handset volume returns to the default setting of AMPLIFY. When you press
or
on the control panel to adjust the volume, the display shows the setting you are choosing. Each key press changes the volume to the next setting.
WARNING
It is important that you do NOT choose PERMANENT unless all users are
I N I T I A L S E T U P | 4 - 4 |