87
7. Settings and Operations for Scan Functions
Controller Setting
■E-mail Transmission Setting
Set the mail server (SMTP server) to enable mail transmission.
Setting from PageScope Light
1.Start PageScope Light.
2.Enter the password and log on to the Administrator mode.
3.From the “Network” tab, select
| 4334P175CA |
4. Set the following items. |
|
SMTP Server | : Set the IP address of the SMTP server. |
Port Number | : Set the port number of the SMTP server. |
| (The default value of “25” is generally used.) |
SMTP Connection Timeout : Set the communications timeout value with the | |
| SMTP server. |
Setting values | : 30 to 300 sec. |
Maximum | : Set the maximum size of transmission mail |
| capacity. |
Setting values | : No Limitation, 100 to 3000 KB (100 increments) |
Binary Division | : Set whether to divide mail exceeding the |
| maximum mail size into two or more mails (in |
| units of binary). ☞ p.88, ☞ p.94 |
Setting values | : Yes, No |
