17
4. Settings Required for Network Printing
This chapter explains the settings that need to be made for network printing.
Make the necessary settings for network printing by following the procedures given below.
1.Referring to “3. Settings Required for Local Connection,” install the printer driver. ☞ p.7
At this time, select “LPT1” for the port.
NOTE
Do not execute a test print at this time.
Do that after the network connections and settings have been made.
2.Following the instructions given in this chapter, make the necessary settings for network printing.
Change the port of the printer driver installed in step 1 to one for the network connection and change the settings on the controller side as may become necessary.
NOTE
For the IPP connection, it is necessary to start with the step to add the printer driver.
4.1Network Connection That Can be Selected in Each of Different Windows OSs
Different setting procedures apply depending on the output method (LPR, Windows Printing, IPP).
Select the connection scheme optimum for the operating environment.
| Windows | Windows | Windows | Windows | Windows | Protocol Used | |
| 98,98SE | Me | NT4.0 | 2000 | XP | ||
|
| ||||||
|
|
|
|
|
|
| |
LPR |
|
| ❍ | ❍ | ❍ | TCP/IP | |
Windows | ❍ | ❍ | ❍ | ❍ | ❍ | NetBEUI | |
Printing | |||||||
|
|
|
|
|
| ||
IPP |
|
|
| ❍ | ❍ | TCP/IP | |
|
|
|
|
|
|
|
