Minolta CN3101e user manual Settings and Operations for Scan Functions

61

7. Settings and Operations for Scan Functions

This chapter explains how to make settings for and operate the scan functions that become usable when the controller is added.

The copier control panel or PageScope Light is used for setting. Refer to Usage of PageScope Light on Appendix B for the procedures to start PageScope Light and log in the administrator mode. ☞ p.138

The following scan functions are available for use:

• File (Scan to PC)	: Transfers scanned image data to the PC through
	FTP. ☞ p.64

• File (Scan to FTP Server) : Transfers scanned image data to the server through

	FTP. ☞ p.69
• Scan to E-mail	: Transfers scanned image data as a file attached to e-
	mail. ☞ p.86
• File (Scan to HDD)	: Captures scanned image data to the hard disk of the
	copier. ☞ p.77
• Scan to Internet FAX	: Transmits and receives image data through the
	Internet Fax standard. ☞ p.94

The following environment is necessary to use the scan functions.

•Network environment using TCP/IP protocol

• File (Scan to PC)	: The FTP server application must be installed in
	the receiving PC.

•File (Scan to FTP Server) : The FTP server application must be installed in the receiving PC.

•	Scan to E-mail	: A mail server must be available for the network.
•	Scan to Internet FAX	: A mail server must be available for the network.
		When data is to be transmitted, it is necessary that
		the machine on the receiving end be capable of
		receiving Internet Fax.