Minolta CN3101e user manual Connector Locations, Connecting the Network Cable

5

2. Connecting the Cable

Make the cable connection between the PC and the controller by using the appropriate cable for the specific connection scheme used.

If the copier is to be used in stand-alone environment, use the IEEE1284 (Centronics) or USB cable. If the copier is used in network environment, use the network cable.

2.1Connector Locations

(1)

(2)

(3)

LED1

LED2

4334O034AA

(1)USB

(2)IEEE1284 (Centronics)

(3)Network

■Connecting the Network Cable

1.Use the cable that complies with the 10Base-T or 100Base-TX standard. Use Category 5 or 5E cables for the network cable.

2.When the cable is connected to the connector, LED1 turns ON.

[Description of the LEDs]

LED1: LINK = Lights if the network connection is established.

LED2: ACT = Blinks depending on the data reception status.