7. Settings and Operations for Scan Functions
73
Setting the Proxy Server
Make the following settings to use the proxy server.
Setting from PageScope Light
1. Start PageScope Light.
2. Enter the password and log on to the Administrator mode.
3. From the “Network” tab, select “FTP Server” – “FTP Server Configuration.”
4. Set the following items.
Proxy IP Address : To use a proxy server, set the IP address of the
proxy server.
Port Number : Set the port number of the proxy server.
FTP Connection Timeout : Set the communications timeout value with the FTP
server.
Passive Mode : Set the Passive Mode
Setting values : Enable, Disable
4334P174CA