Minolta CN3101e user manual 4334P201CA

90

7. Settings and Operations for Scan Functions

Scan Operation

You have three ways to choose from to perform the scan operation depending on whether the destination is set with a one-touch key or a one time key, or set through direct input from the copier control panel.

■Specifying the destination using a one-touch key:

1.Press the Scan key on the copier.

2.Select the “Destination” tab.

3.Select the “IndexList” key.

4.Select the target index from the index list. Touch “Enter.” (Registering Index ☞ p.110)

5.Select the one-touch key in which the destination has been set. The one-touch keys that can be used at this time are only those, for which “Scan To E-mail” has been set for Job Type when one-touch key registration was made.

4334P201CA

6.Set the scanning mode. (Ref.: Setting the Scanning Mode) ☞ p.92

7.Specify the document. (Ref.: Specifying the Document) ☞ p.92

8.Press the Start key.

NOTES

•One-touch key registration is possible from PageScope Light.

•For details of one-touch key registration, see “Advance Registration of Destinations” of chapter 7. ☞ p.110

■Specifying the destination using a one time key:

The destination may be set using a one time key. ☞ p.115