Minolta CN3101e user manual 135

		135
		9. Troubleshooting
Symptom	Possible Cause	Action
Unable to specify	Hole Punch cannot be	Check the setting for each
Punch.	specified together with	item of the printer driver.
	Booklet, OHP, Thick2,
	and/or Thick3.
Unable to effect	Printed pages can at times	Check the setting for
Punch.	be fed out without being	Orientation.
	punched if the direction of
	the paper loaded in the
	paper source is not correct.
The hole punch	Orientation setting is not	Check the punch position on
position is not what is	correct.	“Page Layout” of a printer
expected.		driver property sheet.
Unable to specify	FN-8 is necessary for	Specify FN-8 for “Device
Folding.	Folding. FN-8 must be	Option.”
	selected on “Device
	Option.”
	Folding cannot be	Check the setting for each
	specified together with	item of the printer driver.
	Staple and/or Thick.
Unable to print image	Memory space available is	Simplify the image to reduce
properly.	not sufficient.	the volume of data
		manipulated.
Paper is not fed from	Paper will not be fed from	Load the paper source with
the specified paper	the specified paper source	paper of the appropriate size
source.	if that paper source is	and in the appropriate
	loaded with paper of a	direction.
	different size and
	direction.